Processes Categorize

( click and you will read what you want to know about  our process of crafts Immediately )

Iron /brass  stamp with soft enamel

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Iron /brass stamp with hard enamel

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Iron/brass with soft enamel with epoxy

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

after color filling , we need to add epoxy on the surface .epoxy will protection the color and make the surface as mirror 

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Iron/brass with hard enamel with printing

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

after color filling ,  we  will add epoxy surface ,will protection the color and make the surface like mirror .and then we will printing the samll detailes or CMYK color on the epoxy.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Iron/brass stamp with soft enamel with printing

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area. after color filling and polish and plating , we will printing the small detailes or CMYK  printing on the surface.

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

zinc alloy  die- casting with soft enamel

* Making CNC  artwork 

* Engrave mould

* Die- Casting the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

zinc alloy  die- casting with hard enamel

* Making CNC  artwork 

* Engrave mould

* Die-Casting the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

zinc alloy  die- casting with soft enamel with epoxy

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

after color filling finish , we will add the epoxy on the surface ,  epoxy will protection the color and make the surface like mirror

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

zinc alloy die- casting with hard enamel with printing

* Making CNC  artwork 

* Engrave mould

* Stamp the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

zinc alloy  die- casting with soft enamel with epoxy with printing

* Making CNC  artwork 

* Engrave mould

* Dic Casting the logo from the mould to the material 

* Outline cutting molds may be required depending on the complexity of the design.

 * If a center hole or cut-out is required, an additional cut-through mold must be used.

Put the needle or  saftey pin on the backside  with solder paste 

Polish the front and backside and the side by hand , this will make your products more  shiny on the surface .

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Stainless steel printing with epoxy

* Making Film

 

Printing the logo from the film to the material.

* Cut out  the logo from the material

* Outline cutting molds may be required depending on the complexity of the design.

 

Put the needle or  saftey pin on the backside  and add the eopxy on the surface

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

brass with Photo etching 

* Making Film 

Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid. Click on the link to see the different plating colors available for this process.

* Synthetic enamel is carefully hand-filled, one color at a time, using different sized syringes. 

* Drying.

 * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

All items are strictly inspected before delivery. Customer’s satisfaction is guaranteed!

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim (0.3mm minimum). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the AOKI Cloisonne colour chart. For those who prefer Pantone colors, synthetic/ imitation enamel can be used instead. However, this is not as hard as real Hard Enamel but more shiny and clear in color.

Any Other Questions about Crafts or Our Services ?

Please fill in the form , and we get touch with you as soon as possible !

If you want to get the professional guide,please leave your message,we will contact you as soon as possible !